Products
C Frame Direct-Drive Servo Press (SDN1 Series)
- Direct-drive transmission
- The servo motor integrates the pinion shaft directly into the motor
- Increased stroke speed and improved slide movement with less vibration
-
Achieves better product quality and higher productivity
- Low-speed, high-torque servo motor designed for low tonnage servo presses.
- Excels in forming lightweight materials such as high-tensile steel
- Optimizing the slide movement leads to less spring-back and a much lower tool wear rate.
- Energy-saving design for low-carbon manufacturing
- Power Leveling concept: Via Power Unit, supply voltage is stabilized when the instantaneous peak current occurs during the stamping process.
- Servo motor regenerates power using capacitors that reuse some mechanical energy during work time.
- Fan cooling system
-
Low operational noise to improve the working environment.
- Other features
- Easy-to-use Swing Arm Mounted HMI
- 7 default motion profiles and 1 free motion curve
- Tonnage Monitoring
- Circulating Lubrication
- Electronic Overload Protection
- T Stand with Hand Wheel, perfect for tooling setup
|
Model |
SDN1-80 |
SDN1-110 |
SDN1-160 |
SDN1-200 |
SDN1-250 |
||
|
Capacity |
kN |
800 |
1100 |
1600 |
2000 |
2500 |
|
|
Stroke Length |
mm |
160 |
180 |
200 |
250 |
300 |
|
|
Strokes per Minute |
SPM |
~ 80 |
~ 70 |
~ 60 |
~ 50 |
~ 40 |
|
|
Tonnage Rating Point |
mm |
5 |
5 |
5.5 |
6 |
6.5 |
|
|
Die Height |
mm |
320 |
350 |
400 |
450 |
540 |
|
|
Slide Adjustment |
mm |
80 |
90 |
100 |
110 |
120 |
|
|
Slide Area(LRxFB) |
mm |
560x460 |
650x520 |
720x580 |
880x650 |
1110x730 |
|
|
Bolster Area(LRxFB) |
mm |
1050x600 |
1150x680 |
1250x760 |
1470x840 |
1750x900 |
|
|
Bolster Thickness |
mm |
140 |
155 |
165 |
180 |
180 |
|
|
Bolster Height (w/o mounts) |
mm |
900 |
900 |
900 |
1000 |
1100 |
|
|
Frame-Inside Distance |
mm |
510 |
550 |
620 |
800 |
1115 |
|
|
Throat Depth |
mm |
310 |
350 |
390 |
430 |
470 |
|
|
Max. Upper Die Weight |
kg |
275 |
385 |
485 |
1000 |
1300 |
|
|
Required Air Pressure |
MPa |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
※ This specification is subject to change without notice. The product photo is for reference only.
|
Model |
SDN1-88 |
SDN1-121 |
SDN1-176 |
SDN1-220 |
SDN1-275 |
||
|
Tonnage Capacity |
U.S.ton |
88 |
121 |
176 |
220 |
275 |
|
|
Stroke Length |
in |
6.3 |
7.1 |
7.9 |
9.8 |
11.8 |
|
|
SPM @ Full Stroke (no load) |
SPM |
~ 80 |
~ 70 |
~ 60 |
~ 50 |
~ 40 |
|
|
Tonnage Rating Point |
in |
0.2 |
0.2 |
0.2 |
0.2 |
0.3 |
|
|
Die Height |
in |
12.6 |
13.78 |
15.75 |
17.72 |
21.26 |
|
|
Slide Adjustment |
in |
3.1 |
3.5 |
3.9 |
4.3 |
4.7 |
|
|
Slide Area(LRxFB) |
in |
22x18.1 |
25.6x20.5 |
28.3x22.8 |
34.6x25.6 |
43.3x28.7 |
|
|
Bolster Area(LRxFB) |
in |
41.3x23.6 |
45.3x26.8 |
49.2x29.9 |
57.9x33.1 |
68.9x35.4 |
|
|
Bolster Thickness |
in |
5.5 |
6.1 |
6.5 |
7.1 |
7.1 |
|
|
Press Height(w/ Mounts) |
in |
35.4 |
35.4 |
35.4 |
39.4 |
43.3 |
|
|
Inside Frame Dimension |
in |
20.1 |
21.7 |
24.4 |
31.5 |
43.9 |
|
|
Throat Depth |
in |
12.2 |
13.8 |
15.4 |
16.9 |
18.5 |
|
|
Max. Upper Die Weight |
lb. |
606 |
849 |
1069 |
2205 |
2866 |
|
|
Required Air Pressure |
MPa |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
※ This specification is subject to change without notice. The product photo is for reference only.
Related Products 