SDM1 Series｜Heavy Stamping Servo Press

Products

SDM1 Series｜Heavy Stamping Servo Press

Equipped with new-generation SEYI servo control system, this high-efficiency heavy stamping servo press is designed for forming thick metal plates. The slide movement can be flexibly adjusted to fulfill different applications such as bending, drawing and piercing. Suitable to manufacture high-precision and high-quality parts for automobiles, motorcycles, ICT products, aerospace, and medical equipment.

Model : SDM1-500~800

Catalogs

# Servo Technology Application

# Tandem Press Line

# Heavy Stamping

# Tonnage(kN) 3000~6500

# Tonnage(kN) 8000~12000

# Stroke Length 300~450

# Bolster Area(L-R) 2500↓

Description
Specifications

High-Accuracy Forming Press

8-sided guide design to ensure the high stability of the slide

High stiffness of structure and low deformation to ensure the precision

To fulfill Multiple Stamping Processes

Applications for bending, drawing, piercing and so on

Heavy stamping for thick metal plates over 6mm

Intuitive User Interface for Easy Setup

Easy to use for first-line operators

Easy to input the speed parameters at each position of the slide

SI Unit
Imperial Unit

Model		SDM1-500	SDM1-650	SDM1-800
Capacity	kN	5000	6500	8000
Stroke Length	mm	300	300	300
Strokes per Minute	SPM	1~40	1~35	1~30
Tonnage Rating Point	mm	13	13	13
Die Height	mm	650	700	750
Slide Adjustment	mm	150	150	150
Slide Area(LRxFB)	mm	1200 x 1100	1300 x 1200	1500 x 1300
Bolster Area(LRxFB)	mm	1200 x 1200	1300 x 1300	1500 x 1500
Bolster Thickness	mm	250	250	250
Bolster Height(w/ Mounts)	mm	1060	1100	1200
Max. Upper Die Weight	Ton	1	1.5	2
Slide Adjustment Motor	kW×P	1.5 x 4	2 x 6	2 x 6
Window Opening(FBxUD)	mm	700 x 550	800 x 600	850 x 650
Press Height	mm	5300	5600	6500
Required Air Pressure	MPa	0.6

※ This specification is subject to change without notice.

Model		SDM1-550	SDM1-715	SDM1-880
Capacity	U.S. ton	550	715	880
Stroke Length	in	11.81	11.81	11.81
Strokes per Minute	SPM	1~40	1~35	1~30
Tonnage Rating Point	in	0.51	0.51	0.51
Die Height	in	25.59	27.56	29.53
Slide Adjustment	in	5.91	5.91	5.91
Slide Area(LRxFB)	in	47.24 x 43.31	51.18 x 47.24	59.06 x 51.18
Bolster Area(LRxFB)	in	47.24 x 47.24	51.18 x 51.18	59.06 x 59.06
Bolster Thickness	in	9.84	9.84	9.84
Bolster Height(w/ Mounts)	in	41.73	43.31	47.24
Max. Upper Die Weight	LBS	2204	3306	4409
Slide Adjustment Motor	HP×P	2 x 4	2.7 x 6	2.7 x 6
Window Opening(FBxUD)	in	27.56 x 21.65	31.50 x 23.62	33.46 x 25.59
Press Height	in	208.66	220.47	255.91
Required Air Pressure	PSI	71

※ This specification is subject to change without notice.